R
EMOS
3
600
51
51
R
EMOS
3
600
8.8
Connecting folded wings to fuselage
Withdraw the main wing securing bolt from the wing and place it nearby. Ensure
that the bolt stays clean till remounted.
Remove the wing support aid bracket while a second person is supporting the wing
at the wing tip.
Now the second person at the wing tip moves the wing slowly forward while
securing that the wing does not spin around its axis. The weight of the wing is
supported by its strut, therefore, the wing must never be lifted or pushed on top.
When the wing has reached its forward position, the person at the fuselage
position has to rotate the wing to align both connection latches. Care has to be
taken, that the surface of the wing is not damaged by the fuselage connecting
latches.
When the connection latches between the fuselage and wing are aligned, the wing
must be lifted by the person at the wing tip. The person at the fuselage must
ensure that flap drive connection fits correctly into the bushing on the fuselage.
If all latches have engaged and the wing fits properly to the fuselage, the main bolt
can be pushed into its support tube. To install the main bolt correctly, please use
the special installation tool which comes with the aircraft. Now secure the bolt with
the securing pin.
The person at the wing tip can now release the pressure supporting the wing tip.
Inside the cabin, the pushrod connection of the ailerons MUST be established.
Proceed in identical order with the second wing.
1.
2.
3.
4.
5.
6.
7.
8.
Aircraft Ground Handling and servicing
8