ENGLISH
4
TROUBLESHOOTING
If blades do not seem to cut hair easily, the taper lever (DIAGRAM 6) can be used to remove
any hair caught between the comb and blade. Switch the clipper on and move the taper lever
up and down a few times but do not force the lever in either direction. This should remove
hairs and restore the cutting effi ciency. If not, contact your nearest Remington
®
Service
Centre.
IMPORTANT SAFETY INSTRUCTIONS
WARNING – TO REDUCE THE RISK OF BURNS, ELECTROCUTION, FIRE, OR
INJURY TO PERSONS:
An appliance should never be left unattended when plugged into a power outlet.
Keep the power plug and cord away from heated surfaces.
Make sure the power plug and cord do not get wet.
Do not plug or unplug the shaver with wet hands.
Do not use the product with a damaged cord.
Use and store the product at a temperature between 15°C and 35°C.
Always unplug from the mains when cleaning.
Only use the parts supplied with the appliance.
Keep this product out of reach of children. The use of this appliance by persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge can
give cause to hazards. Persons responsible for their safety should give explicit instructions
or supervise the use of the appliance.
PROTECT THE ENVIRONMENT
Do not dispose the clipper in household waste at the end of its useful life. Disposal can
take place at our service centres or appropriate collection sites.
CAUTION:
Do not put in fire or mutilate your battery packs as they may burst
or release toxic materials.
For further information on recycling see www.remington-europe.com
100591_REM_IFU_HC5030_ INT_ 21L.indd GB4
100591_REM_IFU_HC5030_ INT_ 21L.indd GB4
11.08.10 21:29
11.08.10 21:29