Value
Description
Unit
Software version
-
Parameter version
-
7.3.1 Status and Sub-status
The information menu gives the following status and sub-status num
bers:
Tab.7
Status numbers
Status
Stand-by mode
Boiler start (heat demand)
Burner start
or
Burners active in CH or DHW mode
Burner stop
Boiler stop (end of heat demand)
Control stop
Blocking
Lock out
or
or
Chimney mode
Manual
Frost protection
Boiler reset mode
Tab.8
Sub-status numbers
Sub-status
Stand-by mode
Anti-hunting
Start (external) pump
Open flue gas damper/external gas valve
Increase fan speed
Pre-ventilation
Wait for enable signal
Burner on
Pre-ignition
Main ignition
Flame detection
Intermediate ventilation
Temperature control
Limited temperature control (ΔT protection)
Output control
Temperature gradient protection level 1 (modulate down)
Temperature gradient protection level 2 (part load)
Temperature gradient protection level 3 (blocking)
Modulate up for flame control
Temperature stabilisation time
Cold start
7 Settings
7616014 - v.03 - 15022016
23
