7.2.8 Resetting the maintenance message
Reset the maintenance message once the stated maintenance service
has been carried out.
1. Navigate to the Counter menu.
2. Press the
key to open the Operating hours/Timer Program/Time
display menu.
3. Press the
key to access the Operating hours menu.
4. Keep pressing the key until
is displayed.
5. Press the
key to reset the maintenance message.
6. Press the
h
key twice to go back to the main display.
7.2.9 Activating Chimney Sweep Mode (forced part load for full
load)
1. Press the two keys on the left simultaneously to select Chimney
Sweep mode.
The boiler is now running at part load. Wait until
0
appears on
the display. The chimney sweeping symbol and a flame symbol ap
pear at the top left of the screen.
2. Press the key twice. The boiler is now running at full load. Wait
until
0
appears on the display. A large triangle appears next
to the flame symbol at the top left of the screen.
3. To go back to the main display, press the
h
key once.
Forced part load or full load is switched off.
7.2.10 Activating the manual mode menu
1. Navigate to the manual mode menu.
2. Press the
key to open the menu.
Note
Manual mode is available only when the icon flashes.
3. The current desired flow temperature in manual mode is displayed.
4. Press the or keys to modify the required flow temperature in
manual mode.
5. Press the
key to confirm a new parameter value.
The boiler is now in manual mode.
Fig.68 Accessing the Counter menu
MW-3000320-01
Fig.69 The Counter menu appears
MW-3000321-01
Fig.70 Maintenance appears
MW-3000356-01
Fig.71 Resetting the maintenance message
MW-3000357-01
Fig.72 Accessing Chimney Sweep Mode
MW-3000325-01
Fig.73 Full load is set.
MW-3000326-01
Fig.74 Back to the main display
MW-3000327-01
Fig.75 Accessing manual mode menu
MW-3000302-01
Fig.76 Changing the desired flow tempera
ture
MW-3000303-01
Fig.77 Confirming a new value
MW-3000304-01
7 Settings
20
7616014 - v.03 - 15022016
