REMEHA CALORA TOWER GAS 15S EX, Инструкция по установке и обслуживанию

Страница: 48 / 108

n
Analogue output (0-10 V)
This outlet can be configured either for the temperature or the
output. The two controls are described briefly below.
A jumper (
1
) on the interface is used to select either temperature
control ( * ) or heat output control (
%
).
Jumper 1 Output signal (V) Temperature À Description
*
0,5 - Alarm
1 - 10 10 - 100 Delivered temperature
Jumper 1 Output signal (V) Heat output (%) Description
%
0 0 - 15 Boiler off
0,5 15 - 20 Alarm
2,0 - 10
(1)
20 - 100 Heat output supplied
(1) Dependent on the minimum modulation depth (set speeds, standard 20%)
5.9.5. Connection possibilities for the PCB (SCU-
S02)
n
Installing the PCB
SCU-S02
C003819-B
SCU-S02
PCU 192
SCU-S
n
Connecting the board
Connect the BUS connector on the SCU-S02 board to the PCU board
in the boiler.
T000800-A
1
2%
1 1
5. Installation CALORA TOWER GAS 15S EX CALORA TOWER GAS 25S EX
CALORA TOWER GAS 35S EX
46 22/04/2016 - 300026141-001-07