REMA PTH-M Series, Руководство пользователя

Страница: 7 / 20

7

Test different functions by putting the Release Lever in 3 different positions respectively. If it
does not function properly, then adjusting Lock Nut (No.36) by following process.
See Picture 2.
Picture 2
3.How to
release the air from the pump.
See picture 3
When pushing the handle down, the fork can’t be lifted instantly. Please loosen the Screw (No.130)
on the pump while pushing the handle down slowly to release the air from the pump. Then tighten
the screw.
4.When to add oil
See Picture 3
If the fork can’t be pumped up to its rated highest position, you may have to add hydraulic oil into
the oil tank. The hydraulic fluid to be used must have a quality of ISO VG22 or equivalence. Mixing
of different fluids is prohibited!
Problems Turning direction of Lock Nut
Fork not lifted up - (Counter-clockwise)
Fork not lowering down + (Clockwise)
Picture 3
Add
Hydraulic
Oil
REMA®
MANUAL©