31
Schematic sketch of the load chain configuration
Only use manufacturer’s original parts as these meet the high stress and service life standards required.
Hold down
Sprocket wheel
Chain guide
End stop
Single fall hook
Double fall hook
figure 3 3.1 Version with single fall hook
3.2 Version with double fall hook
Assembly
Assembly work should only be carried out by trained specialists in accordance with VBG 8, section 24.
Mechanical assembly
1.1.23
Hook tackle
The hook tackle used to attach loads for hoists in single- fall version.
figure 4: Single fall hook for 16x45 diameter chain
If maintenance work is carried out don’t is don’t forget to inspect the condition of the hook (check the distance between
the centre punch markings to check hook throat), the thrust bearing, the safety latch and the hook nut with safety pin.
Caution !
The hook nut of the load hook for the single fall hook is locked by using a safety pin 90°
degrees to the hook axis.
Casing
Cover for casing
Load hook complete (incl. hook
nut, thrust bearing, safety latch)
4 pcs.
cylindrical screws
M12x60 DIN 912
Содержание LK-13 Series
