Reloop RMP-1 scratch, Руководство по эксплуатации

Страница: 18 / 44

MAINTENANCE
- Check the technical safety of the device regularly for damage to the mains
line or the casing, as well as for wear of wear parts such as rotary and sliding
switches.
- If it is to be assumed that the safe operation is no longer feasible then the
device must be disconnected and secured against accidental use. Always
disconnect mains plug from the outlet!
- It must be assumed that a safe operation is no longer feasible if the device
bears visible defects, if the device no longer functions, following longer
storage under unfavourable conditions or after major transport stress.
CAUTION LASER RADIATION!
This device is equipped with two Class 1 laser
diodes. To ensure a safe operation do not
remove any covers or try to access the inside of
the equipment. The inside of the device does
not contain any parts which are subject to maintenance. Maintenance must
only be carried out by qualified staff.
INSTALLATION NOTES
A) Connect the OUT hub -29- with the Line IN hub of your mixing console or
amplifier. Optionally, connect the digital OUT hub -30- with any device that
features a digital IN hub, such as a CD burner, MD recorder, digital mixer or
audio card.
B) Connect the hub -32- with the line cord and insert it into your outlet.
C) The Relay Play connection -25- can be used for Relay Play as well as for the
Fader Start function.
For more details go to item -25-.
D) Optionally, attach headphones to the 6.3mm stereo jack connection -26-. Use
the control button -27- to set the volume.
E) After making all connections, switch the device on using the ON/OFF switch
-31-. If no CD is in the drive, the Status LED above the drive -1- is continually
illuminated.
F) Press in Pause/Cue mode the Open/Close button -19- to open the CD tray and
insert a CD. Press the Open/Close button -19- once more to close the tray.
The Status LED above tray flashes while loading. As soon as the CD is loaded
the Status LED goes out. Your CD-Player is ready now.
18
ENGLISH
RMP1_scratch_IM.qxp 04.03.2008 16:38 Uhr Seite 18