Reloop DIGITAL JOCKEY 2, Инструкция по эксплуатации

Страница: 15 / 52

D
e
u
T
S
C
h
15
8. TeChNISChe DATeN
Folgende Daten des Herstellers werden von der Global Distribution GmbH nicht auf Plausibilität und
Richtigkeit geprüft:
Stromversorgung: .......................................................................DC6V, 3A
Maße: ............................................................................................370 x 61 x 307 mm
Gewicht: ........................................................................................2,9 kg (ohne USB- und Cinch-Kabel)
Eigangs-/Ausgangsimpedanz & Empfindlichkeit: .................EQ Flat, Maximum Gain, Load = 100K Ohm
eingansimpedanz und Referenz-einganspegel:
Line: ............................................................................................47K Ohm / -14dBV (200mV) +/-0.1 dB
Phono: ...........................................................................................47K Ohm / -50dBV (3,16mV) +/-0.1 dB
Mic: ............................................................................................10K Ohm / -50dBV (3,16mV) +/-0.1 dB
Ausgangsimpedanz und Pegel:
Master: ..........................................................................................1K Ohm / 0dBV (1V) +/-2dB
Booth: ............................................................................................1K Ohm / 0dBV (1V) +/-2dB
Balanced: ......................................................................................600 Ohm / 2.22dbM (1V) +/-2dB
Kopfhörer (Load = 32 Ohm): .....................................................4.7 Ohm / 0dBV (1V) +/-2dB
Frequenzgang (eQ Flat, Maximum Gain, Load = 100K ohm):
Line: ............................................................................................20 Hz – 20 kHz +/-2dB
Phono: ...........................................................................................20 Hz – 20 kHz +2/-3dB (RIAA)
Mic: ............................................................................................20 Hz – 20 kHz +2/-3dB
ThD + N (eQ Flat, maximum Gain, Load = 100K ohm):
Line: ............................................................................................< 0,07% @ 1 kHz
Phono: ...........................................................................................< 0,09% @ 1 kHz (A-Weighted)
Mic: ............................................................................................< 0,09% @ 1 kHz (A-Weighted)
Maximale eingangsleistung (1 khz, ThD = 1%, eQ Flat, Gain auf 9 uhr, Load = 100K ohm):
Line: ............................................................................................> +6dBV
Phono: ...........................................................................................> -30dBV
Mic: ............................................................................................> -35dBV
Maximale Ausgangsleistung (eQ Flat, Maximum Gain, ThD = 1%):
Master: ..........................................................................................> +7dBV (2,24V) Load = 100K Ohm
kopfhörer: .....................................................................................> +2dBV (1,26V) Load = 32 Ohm
Rauschabstand (Maximum Gain, eQ Flat, W/20 khz LPF, A-Weighted, Master = 0dBv output):
Line: ............................................................................................> 75dB
Phono: ...........................................................................................> 70dB
Mic: ............................................................................................> 65dB
Nebensignal (Maximum Gain, eQ Flat, W/20 khz LPF, A-Weighted, Master = 0dBv output)
Line/Phono:.................................................................................. > 68dB @ 1 kHz zwischen linkem
und rechtem Kanal
............................................................................................ > 68dB @ 1 kHz zwischen den Kanälen
Tone eQ:
Mic: ............................................................................................ -28 +/-3dB @ 100 Hz
-28 +/-3dB @ 10 kHz
Channel: ........................................................................................ 9 +/-2dB, < -30dB @ 70 Hz
9 +/-2dB, < -30dB @ 1 kHz
9 +/-2dB, < -30dB @ 13 kHz
Kopfhörer ..................................................................................... -28dB +/-3dB @ 100 Hz
- 28dB +/-3dB @ 10 kHz
Channel Balance: ........................................................................innerhalb 2dB