Reloop DIGITAL JOCKEY 2, Инструкция по эксплуатации

Страница: 19 / 52

ENGLISH
19
- Do not operate the device under extremely hot (in excess of 35° C) or extremely cold (below 5°
C) conditions. Keep the device away from direct exposure to the sun and heat sources such as
radiators, ovens, etc. (even during transport in a closed vehicle). Never cover the cooling fan or
vents. Always ensure sufficient ventilation.
- The device must not be operated after being taken from a cold environment into a warm environ-
ment. The condensation caused hereby may destroy your device. Do not switch on or operate the
device until it has reached ambient temperature!
- Controls and switches should never be treated with spray-on cleaning agents and lubricants. This
device should only be cleaned with a damp cloth. Never use solvents or cleaning fluids with a
petroleum base for cleaning.
- When relocating, the device should be transported in its original packaging.
- When starting operation, the faders and volume controls of your amplifier must be set to mini-
mum level. Bring the loudspeaker switches into the “OFF” position. Wait between 8 to 10 seconds
before increasing the volume to avoid shot noise created by transient effect, which could cause
damage to loudspeakers and the diplexer.
- Devices supplied by voltage should not be left in the hands of children. Please exercise particular
care when in the presence of children.
- At commercial facilities the regulations for the prevention of accidents as stipulated by the or-
ganization of professional associations must be observed.
- At schools, training facilities, hobby and self-help workshops the operation of the device must be
monitored with responsibility by trained staff.
- Keep this operation manual in a safe place for later reference in the event of questions or prob-
lems.
APPLICATION IN ACCORdANCE WITH REGULATIONS
- This device is a professional DJ MIDI controller with integrated 4 channel soundcard that is used
to control software. The device should be connected via USB cable to a computer.
- This product is authorised for connection to 240 V, 50 Hz AC and is designed exclusively for
indoor application.
- If the device is used for any other purposes than those described in the operation manual, da-
mage can be caused to the product, leading to exclusion of warranty rights. Moreover, any other
application that does not comply with the specifi ed purpose harbours risks such as short circuit,
fi re, electrical shock, etc.
- The serial number determined by the manufacturer must never be removed to uphold the war-
ranty rights.
MAINTENANCE
- Check the technical safety of the device regularly for damage to the mains cord or the casing, as
well as for wearout of wear parts such as rotary knobs and sliding faders.
- If it is to be assumed that a safe operation is no longer feasible then the device must be discon-
nected and secured against accidental use. Always disconnect the mains plug from the outlet!
- It must be assumed that a safe operation is no longer feasible if the device bears visible defects,
if the device no longer functions, following longer storage under unfavourable conditions or after
major transport stress.