a. To delete the channel at this time,
press
DELETE.
The display will show:
For UHF models, the display will show one of the
following:
Blinking
I
Blinking
Press
ENTER
to answer Yes.
if previously programmed
NOTE: To answer
No,
press
TOGGLE
or any
diait kev.
will show, for example:
See page 24 for display sequence of a
deleted channel.
NOTE: If you make an error in number entry, start
over by pressing
CHANNEL
and the correct
number.
b. To step to Receive Frequency, press
ENTER.
3. Receive Frequency
Display will show, for the VHF models, one of
the following:
Blinking
if previously programmed
Blinking
or, if none is programmed
Blinking
or, if none is programmed
4. Key in the six digits of the desired RX frequency.
The valid frequency range is between 150 and
174 MHz for VHF models and between 450 and
482 MHz for UHF models.
Examples of keyed in frequencies:
56045 (158.045 MHz; VHF models)
167237 (167.2375 MHz; VHF models)
470012 (470.0125 MHz; UHF models)
NOTE:
Ignore the decimal.
If an error is made in entering the digits, press
DELETE
and
over.
Press ENTER to store the Receive Frequency in
the Transceiver’s memory. The display will advance
to
RX BCL and Tone Code.
5. RX BCL and Tone Code
Display will show, for example:
Blinking
Tone Code
BCL Code
1 5
