A description of the 20 keys follows:
CHANNEL
Press this key and a digit key(s) to access a chan-
nel.
OPTIONS
Use this key for programming and reviewing the
Options Parameters.
SIMPLEX
This key is NOT functional for the SM Series Tran-
sceivers.
CLONE
This key is used for transferring or cloning data
from
the Transceiver to the Programmer, or
from
the
Programmer to the Transceiver.
ESCAPE
Press this key to abort or leave a programming func-
tion and to check the Programmer’s display.
TOGGLE
Press this key to change Y (Yes) to N (No) and
vice-versa.
DELETE
Use this key to delete numerical data
pressing
ENTER,
or to delete a channel.
ENTER
Use this key to complete an operation. Press this key
to store the displayed information into the memory of
the Transceiver and/or to advance to the next para-
meter for a selected channel. Also, use this key for
reviewing the Transceiver’s channel data or Options
Parameters. In addition, press this key to answer
Yes to any prompt that is displayed as a question.
A
Use this key to go to the next higherchannel. The
new channel’s number will be displayed.
Use this key to go to the next
lower
channel. The
new channel’s number will be displayed.
o-9
These are
(numeral) keys. Use these for
entering numerical data or selecting a channel.
Whether you are programming or cloning, start with
the following 4 steps:
1. Turn the Transceiver OFF.
2. Connect the modular plug from the Programmer to
the Microphone jack of the Transceiver. You will
hear a
when the modular plug is fully seated.
3. a. Turn the Transceiver ON. Its display will
b. The display on the Programmer should first
and then
4. The Unit is now ready to program the Transceiver.
