15. Power Up on Channel 1.
The display will show one of the following:
Blinking
Blinking
16. Press
TOGGLE
key to toggle Y (Yes) to N (No)
or vice
versa.
If Yes is selected, the Radio will
always be on Channel 1 whenever it is turned
ON (powered-up). If it was in the MANUAL Mode
on Channel 13 (for example) when turned OFF, it
will power-up on Channel 1. If it was in the SCAN
Mode when turned OFF, it will power-up in the
SCAN Mode and start
scanning.
Press
ENTER
to store in memory and advance
the display to
TX Carrler Delay.
17.
TX Carrier Delay.
Display will show, for example:
Blinking
18. Enter a value 0, 1, 2 or 3. (See Table 3, below.)
TX Carrier Dleay is the amount of time the carrier
(no modulation) is still present
switch is released.
Table 3. Delay Values
Numeral
0
1
Delay
165
300
Numeral
2
3
Delay
400
500
Press
ENTER
to store in memory and advance
the display to
Message Annunciator.
10
19. Message Annunciator.
The display will show one of the following:
20.
Press
TOGGLE
key to ON or OFF. If ON is
selected, the Message Annunciator feature is
enabled. If OFF is selected, the Message An-
nunciator feature is disabled.
Press
ENTER
to store in memory and advance
the display to
Talk Around.
21. Talk Around.
The display will show one of the following:
Blinking
Blinking
22.
Press
TOGGLE
key to toggle Y (Yes) to N (No)
or
vice versa.
Press
ENTER
to store in memory and advance
the display to
Range.
23. Range.
The display will show, for example:
