NOTES:
1. Each time a Programmer key is pressed, a
will be heard if an external speaker is
plugged into the SM Series Transceiver.
2. If an invalid number is tried, the Programmer
will simply not accept it. A
Beep
will still be
heard, Indicating
a
key has been pressed.
3. Use the A for stepping up (or
for stepping
down) to the next channel.
4.
Press
ESCAPE
to abort any programming
function or to stop. Display will momentarily
show the Display Test pattern (see page 25)
and then:
5. It is recommended that you program the Options
Parameters before
programming the individual
Channel Parameters.
OPTIONS PARAMETERS
NOTES:
1. These parameters pertain to the Unit as a
whole, not for a specific channel.
2. If an error is made in entering the data, press
DELETE
and start over.
3. To REVIEW the Options, repeatedly press
OPTIONS.
OPTIONS (Continued)
1. Press
OPTIONS.
The display will show the
Transmit Time-Out Timer.
For example:
Blinking
2. Enter a value 0 7 (see Table 1 below). Press
ENTER
to store
TOT
in memory and advance
the display to
Scan Delay.
Table 1. Transmit Time-Out (TOT) Values.
Numeral
T O T
Numeral
T O T
(Seconds)
(Minutes;
3.
Scan Delay.
Display will show, for example:
Blinking
4. Enter a value 0, 2 or 3. (See Table 2 below.)
Press
ENTER
to store
Delay in
memory
and advance the display to
Priorlty Delay.
Table 2. Delay Values (Seconds).
6
