RELM GPH-CMD, Руководство по программированию, Страница: 50 / 61

46 BK Radio Programming Manual
using command model as the master
Data that can be cloned to another CMD radio includes:
Group data (GRP 01-25), Command Group data, Global data (GRP
00) and User Pick Lists (UTXG, UNAC, and UTGID)
Data that can be cloned to a standard D/GPH radio includes:
Group data (GRP 00) and Command Group data.
When cloning to a D/GPH radio, the Master’s global data is converted
to group data in the slave, and only the first 16 channels are
transferred.
PRG TX RX SCN D CMND


home channel
T32 N4 G7
PRG TX RX SCN D CMND

CMND CLONE
NOTE: When the Master’s Command Group
is cloned to a slave, the channel data that is
‘pointed to’ by the Command Group is
transferred to a target group (not the
Command Group) in the slave. The target
group’s label in the slave will be set to
‘CMND CLN’.
When receiving an incoming clone from a D/GPH radio, the DPH-CMD
radio ignores group data other than the group label and the group scan
list bit. The DPH-CMD’s global data is not disturbed.
NOTE: Some groups may be “locked” by PC programming to prevent
them from being overwritten. Only “unlocked” groups will accept
incoming clones.
cloning Instructions
Put the Master radio in Programming Mode by pressing and holding
the master switch then pressing and holding the [FCN] key until the
display shows ‘PSWRD-******’. Enter the password of the selected
group. The display shows ‘PRG CH 00.’
Connect the other plug of the cable to the side connector of the radio
you want to clone.
Turn on the clone and set it to the desired channel group by pressing
the [ # ] key and entering the desired group number. To Command
radio Global Data to another Command radio, select “GRP 00”
PRG TX RX SCN D CMND


home channel
T32 N4 G7
PRG TX RX SCN D CMND

PROG|D/GPHCMD
GROUP 01
Press the [ * ] key on the Master radio
keypad. The radio will respond showing the
prompt ‘PROG|D/GPHCMD’ on the first line
and ‘Group XX’ on the second line, where
XX is the currently selected group.