RELM GPH-CMD Скачать руководство пользователя страница 33

Страница: 33 / 61

RELM Wireless Corporation

operation

option 2

option 3

Indication

Disable (Steady)

Enable (Flashing)

Lockout

Enable (Flashing)

Override

Enable (Flashing)

Disable (Steady)

options 2-4 & 5: anI/dtmf mode

PRG TX RX SCN D CMND



home channel
T32 N4 G7

PRG TX RX SCN D CMND



2-12345678

GBL OPTIONS

When Option 4 is enabled (flashing), the

ANI ID number will be transmitted (as a

DTMF tone sequence) with each press of

the PTT switch. See “Automatic Numeric

Identification (ANI)” on the next page for

instructions on setting the ANI number.

When Option 5 is enabled (flashing), the keypad becomes active for

manual DTMF operation.

When Options 4 and 5 are both enabled (flashing), the ANI tone

sequence will be transmitted only after the [ENT] key is pressed while

the transmit PTT switch is activated. A sidetone of the ANI number

transmitted will also be heard through the speaker.

options 2-6, 7 and 8: reserved for future options

Once each option is set as desired, you can store the changes, discard

the changes, or disable all displayed options.
Press the [CLR] key to disable all displayed options (steady).
Press the [ENT] key to store new displayed options settings into

memory and advance to the next field.
Press the [FCN] key to advance to the next field without saving

changes.

Automatic Number Identification ID (ANI)

PRG TX RX SCN D CMND



home channel
T32 N4 G7

PRG TX RX SCN D CMND



ANI 1234567

ANI ID NUM

This field is the ‘ANI ID’ number (as many as

seven digits may be used). The ID number

can be used for either radio management or

transmitted as a DTMF tone burst for ANI

purposes. The ANI can be enabled or disabled. See “ANI/DTMF Mode”.

If no change is needed for the ID number, press the [FCN] key to

advance to the next field.

Содержание GPH-CMD






























































Результаты поиска

Содержание GPH-CMD

Отзывы:

RELM GPH-CMD, Руководство по программированию, Страница: 33 / 61

Результаты поиска

Содержание GPH-CMD

Отзывы: