RELM GPH-CMD Скачать руководство пользователя страница 40

Страница: 40 / 61

BK Radio Programming Manual

channel Parameters

From the “CH 00” position, enter the number of the channel to be

programmed, or press the [PRI] key to increment to the desired

channel. Once the desired channel is selected, press [FCN] to access

the data. See “Selecting Channel Parameters”.

channel bandwidth

PRG TX RX SCN D CMND



home channel
T32 N4 G7

PRG TX RX SCN D CMND



CH 01 N

Press ‘1’ and the display will show ‘PRG CH

01’. This is the starting point for entering

channel 1 values.

At this point, pressing the [#] key will toggle

the channel’s bandwidth setting. An ‘N’ will appear to the right of the

channel number when the channel is set for 12.5/15 kHz channel

spacing using the narrow band receiver filter. A ‘W’ appears when the

channel is set for 25/30 kHz channel spacing using the wide band

receiver filter.

receive frequency

PRG TX RX SCN D CMND



home channel
T32 N4 G7

PRG TX RX SCN D CMND



136.25000

RX FREQUENCY

Press the [FCN] key to move to the ‘RX

FREQUENCY’ field. This is the receive

frequency for channel 1 (in MHz).
If the displayed frequency is correct, press

the [FCN] key to advance to the next field.

If a new frequency is desired, press the [CLR] key followed by the

digits of the desired frequency. Then press the [ENT] key to store this

frequency and automatically advance to the next field.

receive mode

(Digital models only)

PRG TX RX SCN D CMND



home channel
T32 N4 G7

PRG TX RX SCN D CMND



DIGITAL

RX MODE

This field is the receive mode for channel 1.

Available options are Analog, Digital, and

Mixed.

If the mode is correct, press the [FCN] key to advance to the next field.
If a new mode is desired, press the [PRI] key to cycle through the

mode settings. Press [ENT] to store the new mode and automatically

advance to the next field.

Содержание GPH-CMD






























































Результаты поиска

Содержание GPH-CMD

Отзывы:

RELM GPH-CMD, Руководство по программированию, Страница: 40 / 61

Результаты поиска

Содержание GPH-CMD

Отзывы: