
RELM Wireless Corporation
1
Introduction
This manual covers information used to program G-Series and D-Series
BK Radio models, both portables and mobiles, via the radio’s keypad.
Not all functions are available on all models. For instance, G-Series
radios are not capable of digital operation so functions pertaining to
digital operation will not appear when programming the radio.
In addition, the information in this manual can be referenced to program
older L-Series and E-Series radios.
radio Programming options
There are three different ways to program BK Radio radios:
KeyPad
- A radio can be programmed with it’s keypad and a
LAA0701 programming plug or cloning cable, LAA0700 or G/ECC.
This manual describes these procedures.
clonIng
- You can transfer the programmed settings to another
radio of the same frequency band by using a cloning cable. See the
“Cloning Radio Settings” section of this manual.
Pc
- With a computer, proper programming software, and LAA 0725
interface cable. That procedure is not described in this manual.
Contact BK Radio for the required programming cable and software.
radio models
Instructions for keypad programming of the following models are covered
in this manual.
gPh
Standard analog portable
gPh-XP
Standard analog portable, extended frequency range
gPh-cmd
Command analog portable
dPh
Standard digital/analog portable
dPhX
Standard digital/analog portable, extended frequency range
dPh-cmd
Command digital/analog portable
gmh
Standard analog mobile
gmh-XP
Standard analog mobile, extended frequency range
dmh
Standard digital/analog mobile, extended frequency range
Содержание GPH-CMD
