RELM GPH-CMD, Руководство по программированию, Страница: 12 / 61

8 BK Radio Programming Manual
option 1-2: group scan list
1 -- 12345
PRG
When function 2 is enabled (flashing) the
current group will be scanned when the
radio is operating in Group Scan Mode.
option 1-3: transmit on Priority 1
1 -- 12345
PRG
When function 3 is enabled (flashing)
transmissions will occur on PR1, if PR1 isn’t
programmed OFF, when operating in Single
or Dual Priority Scan Mode.
option 1-4: Priority 1 lock
1 -- 12345
PRG
When function 4 is enabled (flashing) the
[PRI] key is locked out in the Operating
Mode. The user will not be able to change
the designation of the Priority 1 Channel.
When function 4 is disabled (steady) the user will be able to change
the channel that is designated as Priority 1 Channel. See “Dual Priority
Scan” in the Owner’s Manual.
option 1-5: scan list lock
1 -- 12345
PRG
When function 5 is enabled (flashing), the
user will not be able to change the channels
in the Scan List. When disabled (steady),
the user can enter or delete channels from
the Scan List. See “Change the Scan List” in the Owner’s Manual.
store group one settings
Once each function 1-5 is set as desired, you can store the changes,
discard the changes, or disable all 5 functions.
Press the [CLR] key to disable all Group One functions (steady).
Press the [ENT] key to store new Group One settings into memory and
advance to the next field.
Press the [FCN] key to advance to the next field without saving
changes.