Reliance electric PSC7000, Руководство по эксплуатации

Страница: 80 / 84

13-2
Table 13-1 List of PSC Series Option Cards
Name Type (Drawing No.) Parts No.
Power supply card MCPS2 (WR-D4007) B40842640XXX
Digital IO card DIO-1 (S-D4006) B40842607XXX
Analog IO card AIO-1 (S-D4008) B40842610XXX
PSC network card PNET-1 (S-D4007) B40842609XXX
Synchronous card SYNC-1 (S-D4011) B40842713XXX
Absolute encoder input card SAEI-1 (S-D4009) B40842711XXX
Absolute encoder input card II
SAEI-2 (S-D4024) B40842719XXX
ControlNet card PCNA-1 (S-D4019) Discontinued
CC link slave card CCLS-1 (S-D4030) B40173401XXX
Serial reference output card SRO-1 (S-D4026) B40842721XXX
Backplane (4 slots) FSBP-1 (S-D4002) B40842606XXX
Backplane (5 slots) FSBP-2 (S-D4012) B40842612XXX
Backplane (6 slots) SSBP-2 (S-D4022) B40842617XXX
Remote IO card PRIO-1 (S-D4020) B40842615XXX
Remote IO backplane SSBP-1 (S-D4017) B40842614XXX
13.2 Restrictions on PSC Option Cards
There are some restrictions in the PSC option cards used in combination with the PSC7000
Control Card as follows:
Analog IO card
Up to three sets of the analog input and output cards (AIO-1) can be used.
For PSC4000/DDS5000, up to two sets can be used.
CC link slave card
The card where the revision is blank cannot be used.
Serial reference output card
When the serial reference output card (SRO-1) is used, a gate array error may occur right
after the unit is turned on. The error can be cleared by editing bit of the SRO-1 error status
clear register (Register No.:4) as follows:
1. Once, set a bit value to 1 (high).
2. Make sure that the error is cleared.
3. Bring the bit value back to 0 (low).