Relative workshop V3 M-Series, Руководство пользователя

Страница: 32 / 84

V E C T O R O W N E R ’ S M A N U A L
Page • 32
2. Start by routing the RSL along its hook
and loop fastener path along side the
right-hand riser. Insert the pin-end of the
RSL through the guide ring on the #6 top
reserve flap. Mate the patch of yellow pile
hook and loop fastener on the top reserve
flap.
RSLs should only be
installed by a
qualified rigger.
n
ote
3 . After threading the reserve ripcord
through the housing and placing the
ripcord handle into its pocket, insert the
RSL pin through the loop at the end of the
reserve ripcord cable.
section 3 : installing a reserve static line
INSTALLING A RESERVE LANYARD (RESERVE STATIC LINE OR RSL)
1 . Inspect the RSL: Check the stainless steel snap shackle is operating smoothly and that the spring will retain the locking
pin. Check that the hook and loop fastener is clean and sufficiently tacky to hold the reserve lanyard in place. The pin
should be curved from the eye to half way down its length. The rest of the pin should be straight.
4 . Place the rig on a clean surface facing up
and walk on it with stocking feet or clean
shoes to help expel air from the container and
to make it flatter.