Relative workshop V3 M-Series, Руководство пользователя

Страница: 50 / 84

V E C T O R O W N E R ’ S M A N U A L
Page • 50
3. Thread the pull-up cord through the
grommet of the top container flap (flap #1).
Pull the pull-up cord towards the bottom of
the container (avoid overstressing the
grommet). Placing your knee on the closing
loop will help hold it in place.
CLOSING THE MAIN CONTAINER
2. Route the bridle to the right of the
container. Correct bridle routing is CRITICAL
if the Vector 3 is to function properly. The
position of the pin (whether it is from right to
left or vice versa) is much less critical, as it will
release from all possible angles.
8. Kneel on the center of the bag and pull
up the main container side flaps until the
bag fills the container and is flush with the
container.
1. Insert a pull-up cord through the
closing loop located on the bottom flap of
the main container (Hint: this is a good time
to check the condition of the closing loop
to ensure no fraying and to ensure your pilot
chute is cocked, if applicable).
section 4 : closing the main container