Reinke RPM Preferred, Руководство по эксплуатации, Страница: 62 / 64

Field Designer
WITH TOUCH TECHNOLOGY
Touch Screen User ' s Manual
a. “Location”
To determine a strip in the field, enter the beginning and end points of the selected strip in
feet or meters.
In this example strip 1 has been selected to run. [Use the BACK and NEXT buttons to navigate
through the strips. To delete one strip from the program select remove. This will delete only that
strip. To delete all strips from a program, use the CLEAR button.]
b. “Strip” dropdown
Select a strip program to set up. The system can will hold up to 3 strip programs and each strip
program can hold up to 25 strips. Only one strip program can be run at a time.
c. “Moving Forward/Reverse Depth”
Enter the depth in inches and functions from the popup menu that should run while moving in the
forward or reverse direction respectively in the selected strip. For instance, if the strip needs an
auxiliary pump to turn on then you would set the depth (if needed) and select AUX1 on for either
moving forward or moving reverse or both depending on the need.
d. “Outputs”
Use the Popup Menu to select what needs to happen in each
selected strip. (i.e. pump on, pump off, cycle or pulse etc.)
a.
b.
c.
d.
Strip Programming: Lateral Move Only
52