Reinke RPM Preferred, Руководство по эксплуатации, Страница: 33 / 64

Programming
1. End Gun:
W arnin g : Th is pa g e is only to pro g ram t h e end -g uns. T o
ena b le t h e end -g uns to operate g o to t h e R un T a b
and select t h e g roup num b er, sector pro g ram
or step pro g ram required.
b.
a.
a.
c.
c.
a. “Begin & End”
Enter the begin and end positions for each area that the selected group should run. Each group can
hold up to ten different sectors. Multiple groups can be ran simultaneously allowing for up to 40
positions to operate the end gun or another output.
b. “Show Group”
Select the “End Gun” program group that you are wanting to change or add. There are 4 program
groups available on the Touch Screen. Beside each group number is the output to which that group
is tied to. The output type can be changed under the run tab.
c. “Graphics” for End Gun Settings
As positions are entered for the end gun the graphic diagram below will show on the system main
screen display (below). Also on the end gun page (above) the red lines on the graph at the bottom
also show the end gun program or programs.
Touch Screen User ' s Manual
23
WITH TOUCH TECHNOLOGY
WITH TOUCH TECHNOLOGY WITH TOUCH TECHNOLOGY