manualshive.com logo in svg

Reinke RPM Preferred, Руководство по эксплуатации

Поделиться
Скачать
Reinke RPM Preferred Скачать руководство пользователя страница 45

VRI-Interface

There are two options available to run the VRI program. “Run VRI” runs only the

Step 18.

VRI program and the “Run VRI S1” runs the VRI and the Sector Program #1 (from the
program, sector tab) together.

NOTE

: 

Step

 

and

 

Time

 

programs

 

can

 

be

 

selected

 

to

 

run

 

also

 

with

 

either

 

of

 

these

 V

RI

 

options.

Select “UPDATE” button at the bottom right hand side of the screen.

Step 19.

Step 20.

The VRI prescription map will be displayed on the Main Screen now. Congratulations,

you have completed setting up the VRI prescription for this system.

Note

: 

This

warning

 

sign

 

will

appear

 

if

 

the

prescription
downloaded

 

does

not

 

match

 

the

 

Rrx

file’s

 

description

 

of

the

  

mechanical

abilities

 

of

 

the

system.

 

System

may

 

not

 

water

 

as

intended.

WITH TOUCH TECHNOLOGY

WITH TOUCH TECHNOLOGY

Touch

 

Screen

 

User

'

s

 

Manual

35

Содержание RPM Preferred

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды