REID LIFTING PGR1TM20 Скачать руководство пользователя страница 5

Self retracting lifeline for  

fall arrest scenario

Retrieval SRL installed on 

upright with bracket

*Set up is indicative - Various winch brackets available.  

Masterlink or Close Coupled trolley options available. 

Fall Protection/Confined Space Set Up | 1 User

9

PORTA

GANTRY

  RAPIDE

Fall Protection Applications

    

Never walk away from the footprint of the 
product or move outside designated safe zones 
whilst connected to it where there is a risk of a 
fall (refer to figure B). Ensure that the operating 
area is within the footprint of the system before 
beginning work. 

    

When using the product as a fall arrest anchor 
ensure there is adequate fall clearance 
when working at height (refer to figure C) A 
competent person should calculate this taking 
into account all of the components of the 
personal fall arrest system and allowing a safety 
margin.

    

Never adjust the product whilst a person is 
attached to it.

    

Only use designated anchor points for the 
attachment of fall protection devices.

    

Ensure that any fall protection system 
components being used are compatible and 
meet the requirements of applicable standards.

    

When using this equipment ensure that there is a 
rescue plan prior to starting work and ensure that 
users are trained in the correct execution of the 
plan and have all necessary rescue equipment 
to hand.

    

Where required by regulation, each installation 
must be approved by a qualified person. 

    

Always wear appropriate PPE when installing, 
setting up, dismantling and using this 
equipment.

    

Misuse of this product could result in serious 
injury or death.

Warnings

    

For fall protection applications the maximum 
user weight is 150kg or the weight allowed by 
the lowest rated piece of equipment in the fall 
arrest system.

    

Ensure that you have read and understood the 
maximum force tables for each anchor point.

    

This equipment must only be assembled, 
installed and used by persons who have been 

trained in its correct application and use.

    

When using for fall protection, only use one fall 
arrest device with each pulley/sheave and make 
sure that working procedures prevent individual 
lifelines from crossing and becoming tangled. 

    

When using the product in conjunction with 
another manufacturers fall protection products, 
ensure that you have read the instructions for 
use of those products to ensure their suitability 
and any restrictions for use. Only use approved 
brackets for the connection of winches and self-
retracting lifelines.

    

It is essential for safety that the product is 
withdrawn from use immediately and not be 
used again until confirmed in writing by a 
competent person should;

            

 

1. 

  

Any doubt arises about its condition for 
safe use or;

            

 

2. 

  

It has been used to arrest a fall

            

 

3. 

  

It has been used for any other purpose, 
other than as a component of a personal 
fall protection system.

IRATA [International Rope Access Trade 

Association]

This product is suitable for rope access and 
has been tested to 15kN static load as per test 
requirements of IRATA International Code of 
Practice (ICOP).

C

B

Содержание PGR1TM20






















Отзывы: