REHM INVERTIG.PRO digital 240 DC, 240 AC/DC, Руководство по эксплуатации

Страница: 53 / 88

Functional description
53

Welding device factory settings
Fig. 46: Overview of System application / factory settings
The factory settings are set by pressing the push and rotate knob twice. The
programs and the settings in the System application are retained.
Welding parameters Factory setting
Gas preflow time 0.1 s
Ignition current 50%
Start current 50%
Upslope time 0.1 s
Current I1 100 A
Current I2 80 A
Pulse time t1 0.3 s
Pulse time t2 0.3 s
Downslope time 0.1 s
End crater current 20%
Gas post-flow time 5.0 s
AC frequency* Automatic
AC balance* - 65%
Ignition HF on
Operating mode 2 step
Polarity* DC Minus
EL current I1 150 A
Hot-Start current 70%
Arc Force current 70%
Pulse type Pulses off
Pulse frequency 500 Hz
* not used in DC systems
Fig. 47: Factory settings overview