Rehau RE.GUARD Скачать руководство пользователя страница 11

Страница: 11 / 11

10 Further information

For further information and technical documents of the Water Sensor or

related products like RE.HUB Gateway please refer to:

https://www.rehau.com/ti

Please observe the relevant technical product information, which can be

obtained online at

www.rehau.com/ti

. Subject to technical changes.

This document is protected by copyright. All rights based on this are

reserved. No part of this publication may be translated, reproduced

or transmitted in any form or by any similar means, electronic or

mechanical, photocopying, recording or otherwise, or stored in a data

retrieval system.

Rheniumhaus

95111 Rehau

410604 EN 11.2020

09 Simplified declaration of EU conformity

REHAU AG+Co hereby declares that the device complies with the basic

requirements and relevant provisions of the 2014/30/EU, 2011/65/EU

and 2014/53/EU Directives.

The complete text of the Declaration of Conformity is available at the

following Internet address:

www.rehau.de/zertifikate-hochbau

Содержание RE.GUARD












Результаты поиска

Содержание RE.GUARD

Отзывы:

Похожие инструкции для RE.GUARD

Бренды по названию

Популярные бренды

Rehau RE.GUARD, Руководство по эксплуатации

Результаты поиска

Содержание RE.GUARD

Отзывы:

Похожие инструкции для RE.GUARD

Бренды по названию

Популярные бренды