Rehau RE.GUARD, Руководство по эксплуатации

Страница: 6 / 11

3M
Note:
Wipe clean the surface where the Water Sensor will be mounted.
Any dust and particles can reduce the adhesion of double-sided
mounting tape
04 Adding/removing the device
Adding:
1. Open the cover.
2. Place the device within the direct range of your Z-Wave controller,
e.g. RE.HUB Gateway.
3. Set the main controller’s adding mode (see the controller’s manual),
e.g. via RE.GUARD App.
4. Press the Z-button once or press it briefly three times, the LED indi-
cator should blink fast in blue.
Z-Button