Rehabed LEO Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 56

Rehabed LEO Скачать руководство пользователя страница 52

52

Other mattresses available upon request

–

contact your seller or the manufacturer to

check for compatibility and suitability purposes.

▪

Mattresses and side rails not approved by the manufacturer
pose a risk of entrapment for the bed user.

▪

The manufacturer deems the listed above foam mattresses to
be suitable for use with the Leo side rail, however a p

atient risk

assessment must be performed to ensure the gap between the
top of the mattress and top of the side rail when fully lowered
is acceptable and will not introduce a hazard to the patient
when entering/exiting the bed.

▪

If  the  dynamic  mattresses  are  used  without  side  rail  height
extensions  a  patient  risk  assessment  must  be  performed  to
ensure the gap between the top of the mattress and top of the
side  rail  when  raised  is  acceptable  and  will  not  introduce  a
hazard to the patient.

▪

If the dynamic mattresses are set to a low pressure the gap
introduced by cell compression at the mattress edge and the
side rail is to be considered. A patient risk assessment must be
performed to ensure an asphyxiation risk is not introduced.

▪

Make  sure  that  the  applied  mattress  is  characterized  by  the
correct size and type and that it is positioned in a right way on
the  bed.  The  mattress  should  be  placed  between  mattress
holders  on  sides  of  the  mattress  platform  sections  –  an
incorrect mattress may pose a risk of entrapment and/or fall of
the patient.

▪

Make sure that side rails and mattress are correctly selected –
incorrect selection of products may pose a risk of entrapment.

▪

Make sure that the control box of the dynamic mattress is not
placed on side rails

–

risk of damage by falling when/after

lowering side rails.

▪

It is essential that dynamic mattress straps are only attached to
the  moving  parts  of  the  profiling  mattress  platform.  If  the
straps  are  incorrectly  fitted  around  the  main  section  of  the
mattress  platform,  serious  damage  could  occur  to  various
components of the bed. If in doubt contact your local provider
or the manufacturer.

«
...
50
51
52
53
54
...
»

Содержание LEO

























































Отзывы:

Нет отзывов