Rehabed LEO Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 56

Rehabed LEO Скачать руководство пользователя страница 32

32

The manufacturer recommend that the handset is positioned on
the side rails with all functions locked out when the patient is left
unattended to minimise the risk of unauthorsied operation and
accidental strangulation.

8.6.2.

10

AND

9-

BUTTON HANDSET OPERATION

Note: when the bed is in the tilt position (even if the Trendelenburg function is locked),
levelling the mattress platform is carried out through the adjustment of the mattress
platform high, by lifting the platform upwards (maximum value) or lowering down
(maximum value)

–

until the mattress platform is levelled.

▪

Engage the lockout function if a patient could be injured due to
inadvertent motion of the mattress platform.

▪

If children, adults with learning difficulties or even pets pose a
potential risk of intentional or unintentional tampering with
the bed the lockout function on the handset is to be used at the
discretion of the carer.

▪

The bed is not fitted with a battery backup facility, so it must
always be plugged into the mains supply during normal use.

▪

Consideration is to be taken in the storage of the handset
lockout key to minimise the risk of it being swallowed by a
baby, child or the bed occupant and creating a choking hazard.

«
...
30
31
32
33
34
...
»

Содержание LEO

























































Отзывы:

Нет отзывов