Rehabed LEO Скачать руководство пользователя страница 29

Страница: 29 / 56

8.5.3.

PERATING THE WOODEN

FULL

LENGTH SIDE RAILS

To lower side rails:

▪

Lift the side rails gently, vertically
upwards.

▪

Press the release button for side rails.

▪

Gently lower the side rails (the
release button can be let depressed
when lowering side rails).

To raise the side rails:

▪

Lift the side rail until it is heard to
latch into position at the top height.

8.5.4.

PERATING THE

IGHT SIDE RAILS

To lower side rails:

▪

Pull the side rails gently towards head bed end.

▪

Press the release button for side rails.

▪

Gently lower the side rails (the release button can
be let depressed when lowering side rails).

To raise the side rails:

▪

Lift the side rail until it is heard to latch into
position at the top height.

8.5.5.

PERATING THE SPLIT SIDE RAILS

To lower side rails:

▪

Pull the

side rail’s release button.

▪

Gently move the side rail until the lock disengages.

▪

Gently lower the side rails (the release button can
be let depressed when lowering side rails.

To raise the side rails:

▪

Lift the side rail until it is heard to latch into
position at the top height.

▪

When in the raised position, ensure the side rails are locked in
place at all times in order to avoid trapping and/or injury.

▪

Before using side rails, make sure that no limbs or objects are
placed between side rails due to the risk of trapping and/or

injury, as well as damage to side rails or the bed’s frame.

▪

Side rails are not designed to support the patient.

▪

Side rails are not designed to be used as a patient’s lifting aid.

▪

Содержание LEO

























































Результаты поиска

Содержание LEO

Отзывы:

Rehabed LEO, Инструкция по эксплуатации, Страница: 29 / 56

Результаты поиска

Содержание LEO

Отзывы: