Rehabed LEO Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 56

Rehabed LEO Скачать руководство пользователя страница 48

48

15.3.

T

ECHNICAL DATA OF SIDE RAILS

Leo bed has been tested and approved with wooden side rails along the entire length
of the mattress platform, the Light side rails and the split side rails. The table below
presents the basic dimensions of side rails that can be used with the bed.

WYMIARY PORĘCZY (1 szt.)

Length x Height x Width [mm]

Standard wooden side
rails*

1986x85x28; 1986x95x28; 1986x100x28; 2175x95x28**;

2175x100x28**;

Light side rails (when
raised)

1515x435x45

Split side rails (when
raised)

Head end side rail (short side rail)

770x420x25

Foot end side rail (long side rail)

1155x420x25

* The dimension depends on the selected bed option

**

To be used only with bed extension.

The manufacturer recommends the use (only) the manufacturer’s side rails along with

their beds. The manufacturer does not recommend the use of Leo bed with side rails
for patients with a height of less than 146 cm

–

the equipment supplier is responsible

for ensuring the suitability for use.

▪

Despite the fact that the manufacturer made every effort to
ensure that the design of side rails meets the appropriate safety
standards, side rails may still pose a potential risk of death
resulting from entrapment and/or suffocation.

▪

Persons responsible for the sale/purchase, selection for use and
adjustment of side rails, should be aware of the potential risk
regarding entrapment and/or suffocation when the bed is in
use.

▪

When positioning and adjusting the side rails, make sure that
all spaces  between  side  rails, mattress and bed frame will not
block the patient’s head and body. Furthermore, the size and
physiological  condition  of  the  patient  should  be  considered.
Conduct  an  assessment  in  order  to  ensure  that  the  gaps
between side rails are not large enough to create a potential
risk of entrapment and/or suffocation. All persons responsible
for the patient care must be aware that increased vigilance is
required when a patient lies on the bed with side rails.

Only medical mattresses may be used. The use of other types of
mattresses may damage the bed.

«
...
46
47
48
49
50
...
»

Содержание LEO

























































Отзывы:

Нет отзывов