Regin Regio Maxi, Руководство пользователя

Страница: 8 / 99

8
Part I
Introduction
Regio Maxi
Communication
The Maxi controllers (RCP-controllers) can be connected to a central SCADA-system via
RS485 (EXOline or Modbus), TCP/IP or LON and configured for a particular application
using the configuration tool Regio tool
©
, which can be downloaded free of charge from
Regin’s homepage www.regin.se . See the manual for Regio tool
©
for more information.
LON communication
Models with LON communication use LonWorks, adjusted according to the LonMark
guidelines. See the LonWorks network variable list in chapter 20.
LON communicates via the LON port on the RCP-unit. The configuration takes place on the
display of the RU-unit or via Regio tool
©
on a PC connected via the RS485 port on the RCP-
unit. The RCP-unit should be installed in the LON network with the help of LonMaker or a
corresponding computer program.
Control states
The controllers can be configured for different control states/control sequences:

Heating

Heating or cooling via the change-over function

Heating/Heating

Heating/Cooling

Heating/Cooling with VAV-control and forced supply air function

Heating/Cooling with VAV-control

Cooling

Cooling/Cooling
All RCP-models can be used for controlling thermal actuators and three-point actuators. The
RCP200...-models can also control 0...10 V actuators, and the RCP...F…-models can be used
for fan coil control.