L540PB-2 / HZI540PB-2 Direct Vent Gas Insert
21
INSTALLATION
10.
Bundle excess wires and power cord - with the exception of the
wire marked receiver.
Receiver wire requires enough slack to reach the front right of the
unit to be connected to the receiver.
Secure wires with cable ties installed in previous step.
Additionally secure wires with a wire clip to be installed in location
shown below.
11.
Install receiver onto backing plate with 2 screws and plug in
receiver cord shown in Step 8.
12.
Connect receiver wire from the wiring harness to the back side of
the remote receiver as shown below
Receiver Wire
Cable Tie
Wire Clip
Left
Right
Cable Tie
Cable Tie
13.
Bundle excess receiver wire using the 4th cable tie and secure to
the front right of the fi rebox as shown below.
