Regency Horizon HZ42 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 57

background image

HZ42 Regency Horizon

TM

Gas Fireplace

2

To the New Owner:

Congratulations!
You are the owner of a state-of-the-art Gas Fireplace by REGENCY

®

. The HZ42 has been

designed to provide you with all the warmth and charm of a fi replace at the fl ick of a switch.
The model HZ42 has been approved by Warnock Hersey/Intertek for both safety and
effi ciency. As it also bears our own mark, it promises to provide you with economy, comfort
and security for many trouble free years to follow. Please take a moment now to acquaint
yourself with these instructions and the many features of your Regency

®

Fireplace.

MANUFACTURED MOBILE HOME REQUIREMENTS

INFORMATION FOR MOBILE/MANUFACTURED HOMES AFTER FIRST SALE

This Regency

®

product has been tested and listed by Warnock Hersey/Intertek as a Direct Vent Wall Furnace to the following

standards: VENTED GAS FIREPLACE HEATERS ANSI Z21.88a-2007 / CSA 2.33a-2007 and GAS-FIRED APPLIANCES FOR
USE AT HIGH ALTITUDES CAN / CGA 2.17-M91.

This Direct Vent System Appliance must be installed in accordance with the manufacturer's installation instructions and the
Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280, or the current Standard of Fire Safety Criteria for
Manufactured Home Installations, Sites, and Communities ANSI/NFPA 501A, and with CAN/CSA Z240-MH Mobile Home Standard
in Canada.

This appliance installation must comply with the manufacturer's installation instructions and local codes, if any. In the absence of
local codes follow the current National Fuel Gas Code, ANSI Z223.1 and the current National Electrical Code ANSI/NFPA 70 in the
U.S.A., and the current CAN/CGA B149 Gas Installation Code and the current Canadian Electrical Code CSA C22.1 in Canada.

This appliance comes equipped with a dedicated #8 Ground Lug for attachment of the ground wire to the steel chassis as applicable
to local codes.

The appliance, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with
the National Electrical Code, ANSI/NFPA 70, or the Canadian Electrical Code, CSA C22.1.

This appliance may only be installed in an aftermarket permanently located, manufactured (U.S.A only) or mobile home, where not
prohibited by local codes.

This appliance can only be used with the type of gas indicated on the rating plate. This appliance is not convertible for use with
other gases.

Ensure that structural members are not cut or weakened during installation.

«
1
2
3
4
5
...
»

Содержание Horizon HZ42


























































Отзывы:

Нет отзывов

Похожие инструкции для Horizon HZ42

Бренд: Ignis Страницы: 12

Бренд: barbas Страницы: 60

Бренд: Osburn Страницы: 48

Бренд: Regal Flame Страницы: 10

Бренд: Dimplex Страницы: 2

Бренд: Majectic Страницы: 24

Бренд: Valor Heating Страницы: 42

Бренд: Riello Страницы: 44

Бренд: HOMEDEPOT Страницы: 4

Бренд: pleasant hearth Страницы: 18

Бренд: Woodbridge Fireplace Inc Страницы: 36

Бренд: M Design Страницы: 13

Бренд: La Hacienda Страницы: 4

Garden Lights 26380

Бренд: Landmann Страницы: 4

Бренд: Valor Страницы: 45

Бренд: IKOS Страницы: 54

Бренд: Mainstays Страницы: 76

Бренд: Majestic Страницы: 70

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды