Regency Horizon HZ42, Инструкция для владельца и по установке

Страница: 26 / 57

HZ42 Regency Horizon TM Gas Fireplace 25
INST
ALLA
TION
INSTALLATION
Maximum:
40
ft.
(12.2m)
Minimum
8’6”
(2.6m)
Min.
33-1/4
”
(1
1
18mm)
Max. 10’ (3m)(centerline to centerline)
Minimum length of pipe
between elbows 12” (305mm)
Maximum:
27
ft.
(8.2m)
0
2
4
6
40
8
10
12
14
16
18
20
22
24
26
28
30
V
ertical
Height
(Feet)
32
34
36
38
6 8
Horizontal (Feet)
2 0 4 10 12 16
1 8
14 20
Vent Restrictor on Set 1
Vent Restrictor on Set 2
Vent Restrictor on Set 0
(factory set)
VENTING ARRANGEMENT FOR VERTICAL TERMINATIONS
The shaded area in the diagram shows all allowable combinations
of straight vertical and offset to vertical terminations, using two
90
o elbows, with Rigid Pipe Venting Systems .
Two 45 o elbows equal to one 90 o elbow. Maximum of four
45
o
elbows allowed, not including the starting 45
o
elbow at the
fl ue collar .
• Vent must be supported at offsets.
• Minimum distance between elbows is 1 ft. (305mm).
• Maintain clearances to combustibles as listed in the
"Clearances" section.
• Horizontal vent must be supported every 3 feet.
• Firestops are required at each fl oor level and whenever
passing through a wall.
• Must use optional rigid pipe adaptor (Part# 510-994)
when using rigid pipe vent systems.
• Refer to the "Vent Restrictor Position" section for
details on how to change the vent restrictor from the
factory setting of Set 0 to Set 1 or Set 2 if required.
Please note min. 1 foot between 90 o
elbows is required.