Regency Fireplace Products City ACV60E Скачать руководство пользователя страница 1

Страница: 1 / 96

Installer

: Please complete the details on the back cover and leave this manual with the homeowner.

Homeowner:

Please keep these instructions for future reference.

City Series®

ACV60E DIRECT VENT

Owners &

Installation Manual

STYLE

MODEL

Single-sided

ACV60ENG / ACV60ELP / ACV60EULPG

www.regency-fire.com

- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of

this or any other appliance.

- WHAT TO DO IF YOU SMELL GAS
•

Do not try to light any appliance.

• Do not touch any electrical switch: do not use any phone in your building.

Leave the building immediately.

• Immediately call your gas supplier from a neighbour's phone. Follow the gas sup-

plier's
instructions.

• If you cannot reach your gas supplier, call the fire department.

- Installation and service must be performed by a qualified installer, service agency or

the gas supplier.

WARNING

FIRE OR EXPLOSION HAZARD
Failure to follow safety warnings exactly could result in serious
injury, death, or property damage.

920-306d

FPI FIREPLACE PRODUCTS INTERNATIONAL LTD. 6988 Venture St., Delta, BC Canada, V4G 1H4

02.28.22

LISTING AND CODE APPROVALS

These gas appliances were tested
in accordance with AS/NZS 5263.0
& AS/NZS 5263.1.8 and certified by
IAPMO for installation and opera-
tion as described in these instruc-
tions.

Must be installed as per AS/
NZS5601.

Your unit should be serviced an-
nually by an authorised service
person.

www.regency-fire.com.au

Содержание City ACV60E

































































































Результаты поиска

Содержание City ACV60E

Отзывы:

Похожие инструкции для City ACV60E

Бренды по названию

Популярные бренды

Regency Fireplace Products City ACV60E, Инструкция для владельца и по установке

Результаты поиска

Содержание City ACV60E

Отзывы:

Похожие инструкции для City ACV60E

Бренды по названию

Популярные бренды