Manual –TC.GXS
2016-09-16
14 / 43
Template V02.11
1.3. Technical data
For further Information refer to the TC.GSS manual and the according
TC.GSS data sheet.
In the manual and data sheet pay attention to the regenerative mode
Q4 and ignore all values of the feeding mode Q1.
1.3.1.
Safety feature
Safety equipment
ISR Option
An possible EMERGENCY STOP mushroom head
pushbutton can trigger the ISR circuit in the TopCon
TC.GXS device.
The DC side will be insulated from the mains via two
integrated safety relays.
Tab. 10 Safety equipment
1.3.2.
Control
Control
HMI (Option)
(Human Machine
Interface)
Built-in HMI (Option) in the TC.GXS device.
Used for operation:
Start / Stop
Set value specification.
Function engine (set value specification):
Selection of pre-defined time-dependent
functions.
Selection of pre-defined V/I
characteristics.
Setting of the most important parameters.
RS-232
Parameterisation via the PC software TopControl,
see also TopCon TC.GSS manual.
Analogue/digital interface
X105
Usage to set values via analogue signals.
For further information see TopCon TC.GSS manual.
Tab. 11 Control interfaces.
For further Information refer to the TC.GSS manual.
In the manual pay attention to the regenerative mode Q4 and ignore all
values of the feeding mode Q1.
For further Information about the RS-422 features refer to appendix
section 9, page
Fehler! Textmarke nicht definiert.
.
