Regada MO 3, Инструкции по установке, обслуживанию и техническому обслуживанию, Страница: 5 / 56

MO 3, MO 3.3, MO 3.4, MO 3.5 3
Instructions for stuff training
Service can be performed only by workers professionally qualified and trained by the producer or
contracted service centre.
Warning for safety use
Product protection
EA MO does not have own short-circuit protection, therefore there must be included suitable protective
device into the supply power (circuit breaker, or fuse), which serves at the same time as main switch.
Type of equipment from a connection point of view: The equipment is designed for permanent connection .
1.3 Data specified on electric actuator
Nameplate: Warning plate:
Nameplate contains the basic data concerning identification, performance and electricity: indication of producer,
type, serial number, max. load torque and switching-off torque, operating speed, protection code, revolutions,
supply voltage and current.
Graphic symbols on electric actuator
The graphic symbols used on electric actuator substitute the text messages. Some of them are in accordance
with EN ISO 7010, ISO 7000 and IEC 60417.
Dangerous voltage (EN ISO 7010-W012)
CAUTION!
1)
(EN ISO 7010-W001)
Stroke of the electric actuator
Switching-off torque
Manual control (0096 ISO 7000)
Protection terminal (5019 IEC 60417)
1)
See. chapter 3.1.2
1.4 Warranty conditions
The supplier is responsible for completeness of the delivery and guarantees these specifications of the
product which are stated in the Contract.
The supplier is not responsible for any deterioration of parameters caused by the customer during storage,
unauthorized installation or improper operation.
!