Regada MO 3, Инструкции по установке, обслуживанию и техническому обслуживанию, Страница: 17 / 56

MO 3, MO 3.3, MO 3.4, MO 3.5 15
Power supply voltage (with power supply) ................................................................................................ 24 V DC
Power supply voltage (without power supply) .................................................................................. 18 to 28 V DC
Ripple voltage .........................................................................................................................................max. 5%
Max power input ............................................................................................................................................ 0,6 W
Load resistance ......................................................................................................................................0 to 500
Ω
Load resistance can be single side grounded.
Influence of resistance on output current ...........................................................................................0,02%/100
Ω
Influence of voltage on output current..................................................................................................... 0,02%/1V
Temperature dependency ................................................................................................................. 0.5% / 10
°
C
Output signal values at limit positions:
“O“.... 20 mA (clamps 81; 82)
“Z“..... 4 mA (clamps 81; 82)
Values tolerance of output signal of capacitive transmitter
“Z“ ........ +0,2 mA
“O“........
±
0,1 mA
Capacitive transmitter linearity error ..........................................................................................................
±
1,2[%]
1)
Capacitive transmitter hysteresis........................................................................................................... max. 5 [%]
1)
1) of the transmitter’s nominal value related to output values with max. revolutions setting for the given stroke
degree according to table 3
Electronic position controller (N) „REGADA" ( Valid for the EA MO version with controller only)
Controller software equipment:
A) Function and parameters
programmable functions:
•
with functional buttons SW1, SW2 and LED diodes D3, D4 directly placed on controller
•
with computer or terminal equipped with corresponding programme, using RS 232 interface.
programmable parameters:
•
control signal
•
response to SYS-TEST signal
•
mirroring (ascending/descending characteristics)
•
insensitiveness
•
EA limit positions (only with computer and ZP2 programme)
•
way of regulation
B) Operation states of controller
Error message from error memory: (using LED diodes and RS 232 and personal computer)
•
control signal missing or faulty
•
input value of current control signal under 3.5 mA
•
existence of SYS-TEST signal
•
activity of switches
•
failure of feedback position transmitter
Statistic data: (using RS 232 and personal computer)
•
number of controller operation hours
•
frequency of relay switching in direction "opening"
•
frequency of relay switching in direction "closing"
Supply voltage: ................................................................................... terminal 61 (L1) -1(N) - 230 V AC ±10%
Frequency: .................................................................................................................................... 50/60 Hz ±2%
Input control signals - analogue: ...................................................................................................... 0 - 20 mA
........................................................................................................................................................ 4 - 20 mA
........................................................................................................................................................... 0 - 10 V
Input resistance for signal 0/4 - 20 mA ..................................................................................................... 250
Ω
Input resistance for signal 0/2 - 10 V ....................................................................................................... 50k
Ω
(Actuator opens at rising of control signal.)
Controller linearity: ................................................................................................................................... 0.5 %
Controller insensitiveness: ............................................................................................... 1 - 10% (adjustable)
Feedback (position transmitter): ......................................................................... resistive 100 up to 10,000
Ω