Regada MO 3, Инструкции по установке, обслуживанию и техническому обслуживанию, Страница: 18 / 56

16 MO 3, MO 3.3, MO 3.4, MO 3.5
..................................................................................................................................... current 4 up to 20 mA
Power outputs: .................................................................................................................. 2x relay 5A/250V AC
Digital outputs: .............4x LED (supply, error, adjustment, "opening", "closing" - with two-colour LED)
Error status: ....................................................................................................... control switch 24 V, 2W - POR
Reaction at error situation: transmitter error - error message LED
Control signal missing: ...................................................................................................... error message LED
SYS mode: ........................................................................................................................... error message LED
Adjusters: .................................................................................................................. communication connector
................................................................................................................. 2x calibrating and adjusting button
2.2.1 Mechanical connection
•
By flange F10, F14 resp. F16 (ISO 5210, DIN 3338)
•
By flange
φ
220 resp.
φ
135 (GOST R 55510)
Main and connecting dimensions are presented in dimensional drawings .
2.2.2 Electric connection
a) Electric actuator
to terminal box type (X)
): - max. 32 terminal connectors , crosscut of connecting wire max. 2,5 mm
2
for
version without contactors, resp. max. 24 terminal connectors, crosscut of connecting wire max. 2,5 mm
2
and
max. 6 terminal , crosscut of connecting wire max. 1,5 mm
2
for version with contactor
- 2 cable bushings from control box – M25x1,5 cable diameter 12,5 to 19 mm
to connector (XC): - (max. 32 poles - the crosscut of connecting wire 0, 5 mm
2
):
- 2x cable bushings-M20x1,5 and M25x1,5 cable diameter from 8 -14,5 mm and 12,5 - 19 mm
b) 3~ electric-motor
in a terminal board make: .................................................. through bushing M25 to the motor terminal board
in connector make: ............ to common connector
(XC)
•
with protection terminal:
external and internal, mutually connected and marked with protection earthling mark.
Electric connection: according to wiring diagrams.