Reely EP Buggy Ranger Brushless 4WD RtR, Руководство пользователя, Страница: 33 / 107

30
 
5. Safety Instructions
The warranty will be void if damage is incurred resulting from non-compliance with the operating
instructions! We do not assume any liability for resulting damage!
Nor do we assume liability for damage to property or personal injury caused by improper use or
the failure to observe the safety instructions! In such cases the guarantee is voided.
Normal wear and tear during operation (e.g. worn tires) is excluded from the guarantee and
warrantee, the same is the case for accidental damage (e.g. broken off transverse link, scratched
or destroyed car body etc.).
Dear Customer, the following safety instructions are intended not only for the protection of the product,
but also for your own safety and the safety of other persons. Therefore read this chapter very carefully
before taking the product into operation!
a) General Information
• The unauthorized conversion and/or modification of the product is inadmissible because of safety and approval
reasons (CE).
• This product is not a toy and is not suitable for children and young people under the age of 14.
• The product must not get damp or wet.
• Taking out private liability insurance is recommended. If you already have one, get some information whether the
operation of a model is covered by your insurance.
• Do not carelessly leave the packaging material lying around as this may become a dangerous toy for children.
• Should questions arise that are not answered with the help of this operating manual, contact us (contact information
see chapter 1) or another expert.
The operation and the handling of remote control model cars must be learned! If you have never operated
such a vehicle, drive especially carefully and get used to the reactions of the car to the remote control
commands first. Be patient!
b) Operation
• Every time before you use the product, make sure that there are no other models operated within the range and on
the same frequency as the transmitter. You will otherwise lose control of the remote-controlled models! Always use
different frequencies.
• Before every use of the model, the settings of the trim regulator for forward/reverse drive as well as those for steering
must be checked, and if necessary, modified.
This is why the wheels of the car must not be placed on the ground yet when the car is put into operation; position the
model on a surface in a way that allows the wheels to turn freely (don’t put your hands in the drive/cogs!).
After that, adjust the trim so that the motor no longer turns when you let go of the lever for forward/reverse operation
or until the steering assembly is straight (the precise settings for driving straight can be carried out later on whilst
driving).