25
11. Maintenance and Care
Regularly check the rudder linkages and the control functions of the servos on your model. All moving parts have to be easily movable but there should not be
a clearance in the bearing.
The outside of the model should only be cleaned with a soft, moistened cloth. Never use aggressive cleansing agents or chemical solvents, since this might
damage the surfaces.
Important!
If you have to replace any damaged or worn parts, only use original replacement parts.
The spare parts list is located on our website www.conrad.com in the download section to the respective product.
You can also order the replacement parts list by phone. For contact information, please refer to chapter “1. Introduction” at the beginning of these operating
instructions.
12. Disposal
a) General Information
At the end of its service life, dispose of the product according to the relevant statutory regulations.
b) Batteries and Rechargeable Batteries
You as the end user are required by law (Battery Ordinance) to return all used batteries/rechargeable batteries. Disposing of them in the household waste is
prohibited!
Batteries and rechargeable batteries containing hazardous substances are marked with adjacent symbol to indicate that disposal in the household
waste is prohibited. The descriptions for the respective heavy metal are: Cd=cadmium, Hg=mercury, Pb=lead (the names are indicated on the
battery/rechargeable battery e.g. below the rubbish bin symbol shown to the left).
You may return used batteries/rechargeable batteries free of charge at the official collection points of your community, in our stores, or wherever batteries/
rechargeable batteries are sold.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
13. Technical Data
Wing Span ................................................................ 1,550 mm
Length ....................................................................... 1,050 mm
Weight ....................................................................... depending on equipment from approx. 500 g
Control ...................................................................... 4 channels
