REED 00 C50SS, Руководство пользователя, Страница: 17 / 84

REED
00 MODEL:
C50SS
TRAILER CONCRETE PUMP
OPER.
PAGE 16
•
Always attach the SAFETY CHAINS to towing vehicle and attach the breakaway cable.
•
Connect trailer electrical cable to truck connection to establish trailer brake circuit and
lighting. Check that lighting is operational.
•
Raise outrigger legs and secure in place with retainer pin.
•
Make sure that hopper cleanout door is securely closed.
•
Fully raise front jackleg and lock handle.
•
Check the tires for proper inflation pressure and inspect for any cuts and excessive
wear.
•
Survey underside of pump and trailer to look for other possible obstructions.
Towing trailers at excessive speeds is DANGEROUS.
Some trailers may weigh as much or more than the
vehicle doing the towing, and can affect the control
of the towing vehicle causing an OVERTURN
condition. This situation can arise from excessive
speed or rapid braking. Therefore, always maintain a
sufficient distance for safe braking.
TOWING TIPS:
•
Never travel with concrete in hopper. The trailer pump is not designed to be towed
with this extra weight.
•
Remove all delivery lines from hopper outlet.
•
Travel only as fast as conditions allow. DO NOT EXCEED 55 MPH (88KM/HR).
•
Always leave sufficient distance between you and the vehicle ahead to allow SAFE
BRAKING.
•
Reduce speed at dips, bumps and rough road areas.
If trailer begins to sway or swerve side to side, ease off of accelerator to slow down. DO
NOT JAM ON BRAKES . Gently touch brake pedal intermittently to come to a stop. Check
to determine cause of sway. Check hitch.
REVISION: