15
REDWING RC 50CC EXTRA
Main Landing Gear
•Locate the landing gear hardware and
assemble both main gear legs as follows.
•First,
install the
axles
using the
provided
lock nut.
•Then, assemble the wheel and collars to the
axle in the order shown.
NOTE:
The inner wheel collar will properly
space the wheel for the wheel pant.
•Next, mark the axle at the outside of the wheel
collar.
•Trim the axle, leaving the mark visible allowing
1-2mm excess to remain and file a flat as shown
for the wheel collar.
From the Pro:
Locating the flat on the bottom of the
axle will allow easy access once the wheel pant is
installed.
•Install the wheel to the axle for the final time
using medium thread lock compound on the
setscrews. Then slide the landing gear fairing
into place as shown.
NOTE:
The landing gear will be angled toward
the FRONT of the fuselage and the taper of the
fairing is positioned toward the rear.
