19
REDWING RC 50CC EXTRA
•Once all holes have been drilled, you may
reinstall the engine for final assembly using
thread lock compound.
•Install the throttle servo and the linkage to the
carburetor.
--The PTE72cc Twin allowed for a short, straight
throttle linkage so we used a ball-link set (NOT
INCLUDED) we had on hand from a previous
model. Control rod and linkage stopper are
included in the hardware.
From the Pro:
The throttle arm on the carb and the
servo horn should be of the same length to allow use
of full servo resolution and better/finer throttle
control.
Ignition Module
•Choose a location for the ignition model a few
inches or more away from the throttle servo if
possible.
•Mark and drill four 3/8 inch holes in the chose
position on the motor box for securing the
module with zip ties.
•Secure into position using
sticky backed Velcro and
secure with zip ties.
