Stabilizer Installation
All parts needed
•
Find pre cut slots for the rudder control horn, Test fit the control horns on both sides.
Prepare the control horns and slots as you did in the wing and Rudder installation. Once
your comfortable with the way everything fits glue in the control horns, hinges and
Elevators to the stabilizer fins
•
Locate the servo mounting location on the fuselage (both sides) use a heated soldering
iron to open the holes for the servos. Pre drill and harden the servo screw holes as done
in the previous steps and install the servos with the 18” twisted wire servo extensions
and secure with safety clips. Run the wires inside to fuselage in the designed servo lead
holes
