Main Landing Gear and Tail Wheel
Main Landing Gear Installation
•
All parts for the Main landing gear
•
Install the landing gear in the pre drilled holes with
the supplied “Phillips” head screws (with built in
washer) and locking nuts.
•
Use a 9/32 Sockets to tighten locking nuts along
with using Blue Loctite on threads
•
Install the landing gear spring steel axles with
locking nuts.
•
Use a Metric 14 Wrench and a ½ inch socket to
tighten
•
Use a Dremel and a grinding disk to grind a flat
spot for the set screw to rest against ensuring a tight
fit.
•
Install the wheel and tighten the collar set screws
using Blue Loctite ensuring that the wheel freely
rotates on axles.
