•
If your not going to install a canister locate the canister bay
cover and install with self-tapping screws to seal off the
motor compartment from inside the fuselage
•
Canister
•
Remove the covering from the pre cut canister air exit
opening and ensure the edge has been sealed. Use a heated
soldering iron with accomplish this for you
•
Bend the flexible manifold to connect to the canister
muffler. Mark and trim the excess pipe to fit.
◦
Tighten the manifold bolts and secure with Blue
Loctite
•
Use the silicone coupler and clams to join the manifold
and the canister muffler
Canopy and Cowl installation
•
locate the 2.5 metric Allen head screws with the rubber
washer and metal washer inside. Set up your screws as
pictured.
